英文合同

时间:2023-05-09 18:34:50 阅读 我要投稿

  随着人们对法律的了解日益加深,人们运用到合同的场合不断增多,在达成意见一致时,制定合同可以享有一定的自由。知道吗,写合同可是有方法的哦,以下是小编帮大家整理的英文合同9篇,希望对大家有所帮助。

英文合同范文集锦九篇

英文合同 篇1

  合同 CONTRACT

  日期:合同号码:

  Date: Contract No.:

  买方: (The Buyers) 卖方: (The Sellers)

  兹经买卖双方同意按照以下条款由买方购进,卖方售出以下商品:

  This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter:

  (1) 商品名称:

  Name of Commodity:

  (2) 数量:

  Quantity:

  (3) 单价:

  Unit price:

  (4) 总值:

  Total Value:

  (5) 包装:

  Packing:

  (6) 生产国别:

  Country of Origin :

  (7) 支付条款:

  Terms of Payment:

  (8) 保险:

  Insurance:

  (9) 装运期限:

  Time of Shipment:

  (10) 起运港:

  Port of Lading:

  (11) 目的港:

  Port of Destination:

  (12)索赔:在货到目的口岸45天内如发现货物品质,规格和数量与合同不符,除属保险公司或船方责任外,买方有权凭中国商检出具的检验证书或有关文件向卖方索赔换货或赔款。

  Claims:

  Within 45 days after the arrival of the goods at the destination, should the quality, Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable. The Buyers shall, have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers.

  (13)不可抗力:由于人力不可抗力的.原由,发生在制造、装载或运输的过程中导致卖方延期交货或不能交货者,卖方可免除责任,合同范本《英文买卖合同》。在不可抗力发生后,卖方须立即电告买方及在14天内以空邮方式向买方提供事故发生的证明文件,在上述情况下,卖方仍须负责采取措施尽快发货。

  Force Majeure:

  The sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to Force Majeure, which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after. The Sellers shall send by airmail to the Buyers for their acceptance certificate of the accident. Under such circumstances the Sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods.

  (14)仲裁:凡有关执行合同所发生的一切争议应通过友好协商解决,如协商不能解决,则将分歧提交中国国际贸易促进委员会按有关仲裁程序进行仲裁,仲裁将是终局的,双方均受其约束,仲裁费用由败诉方承担。

  Arbitration:

  All disputes in connection with the execution of this Contract shall be settled friendly through negotiation

英文合同 篇2

  合同编号:____________

  甲方全名:____________

  乙方全名:____________

  法定地址:____________

  法定地址:____________

  甲乙双方经友好协商,就资料翻译服务事宜签订此合同。合同中价格以人民币为单位(含税)。

  一、甲方委托乙方将主题为_______________资料由__________文译成__________文,资料共计为字(终以实际的翻译字数为准),甲方同意为此交付对应的服务费用。

  二、交稿日期及方式:从合同生效日(即甲方支付翻译费定金日)开始的_____天内(不包括周六,周日),也就是__________年_____月_____日起至__________年_____月_____日止。如果实际的翻译字数超过了合同约定字数,则按每日平均_____字的速度顺延。如果乙方在合同期内未能完成该翻译项目,则乙方必须按照甲方指定的日期内完成未完成的部分(即该部分)。如果仍未按时完成,则甲方有权仅支付乙方翻译费用总额的50%。稿件交付方式为_____。为减轻双方核算的麻烦,双方在此同意,乙方交稿后,甲方在两日内(确认期)对其予以确认,包括数量和质量。超过两日甲方未做任何答复,则视为甲方对乙方所交付的翻译稿件为可接受之稿件。

  三、译稿形式:译稿以中文版文件形式交付,乙方负责所有翻译后的录入、排版和校对工作。交稿时乙方必须向甲方提供两种文档即电子文档和物理文档。即除了交付磁盘文件外,乙方还必须为甲方准备简单装订后的一套打印件(与相应的原文装订在一起)。

  四、费用计算方法:按中文版"字数"的统计数字为准。翻译费用为(大写)__________千字,(小写)____________元/千字。

  五、付款:甲方在交付翻译原稿的.同时交付翻译定金,为总额的30%,即_____元,取得全部译文资料的两天内甲方应全额支付整个翻译款项。

  六、原文版权:甲方保证其提供的资料有正当来源,保证其享有对该资料的翻译权,据此,

  翻译行为将不会侵犯第三方的版权或著作权,亦不会侵犯第三方的其它任何权利。

  七、译文版权:翻译后形成的资料版权属甲方。

  八、质量保证:甲方向乙方提供原稿后,乙方必须在最快的时间内将整个翻译项目的进度

  计划提供于甲方参考,同时就翻译项目中出现的一些疑问提出咨询。甲方有义务回答

  这些咨询。乙方保证其所交付的译稿在制作上及工艺上均无缺陷。关于译稿与原文在含义上的一致性,乙方在本合

  同下为此做全面保证。乙方不保证使用该译文一定可达到何种结果,亦不对由此产生的直接或间接的结果负责,甲方如认为所接收的译文存有缺陷,应在确认期内通知乙方,逾期无效。乙方对甲方指出的译文缺陷,应尽快修改完善。如果在甲方指出缺陷后乙方未能在指定的时间内纠正改善或修改后仍然存在严重的错误,乙方应该将翻译总费用的50%退还给甲方。

  九、有限责任:乙方在本合同下负有如下有限责任:

  (1)乙方为甲方提供的原文资料永久保密,不得擅自将原文资料及其内容透露给第三方,也不得擅自将这些机密资料用作他途;否则甲方保留其诉诸法律的权利(2)乙方保证译文语句流畅,符合成文语言的语法规则和习惯;并尽最大的可能使译文与原文含义一致。

  十、免责条款:乙方在本合同下对下列事件不负任何直接或连带责任:

  (1)因甲方侵犯第三方版权/专利权而引起的第三方的一切及任何损失;

  (2)因原文中存有错误而引起的一切及任何损失;

  (3)因译文与原文一致而引起的一切及任何损失;

  (4)因甲方收到译文后自行改写或丢失所引起的一切及任何损失。

  十一、甲方逾期交款,无正当理由者,则按日交纳所欠金额的千分之五作为违约金。本合同中如有其它未尽事宜,双方协商解决。协商不成,据《中华人民共和国民法典》处理。

  十二、合同终止:____________乙方交清译成资料,甲方交清服务费用,确认期满后本合同自行终止(第九条除外)。如经甲乙双方协商,或因一方违约,或因不可抗力影响,双方同意不再继续合同的,合同将中止执行。

  十三、保密条款;关于本合同及其相关的内容,甲乙双方均不得以任何形式向第三方透露,以保护双方的权益。

  十四、其它:____________本合同一式两份,均具同等法律效力。合同自签订之日起生效。

  甲方签名盖章:____________

  乙方签名盖章:____________

英文合同 篇3

  The buyer: the seller: ____________ ____________

  Address: Address: ____________ ____________

  Tel: ____________ Tel: ____________

  Fax: Fax: ____________ ____________

  Contact: Contact: ____________ ____________

  The sale of the friendly negotiation of both parties, the buyer seller commissioned processing production ________ mould Co ______ set. The two sides reached the following processing agreement

  Basic mould of die:

  Product name serial number part name point number (mold type) mold single price (RMB yuan) delivery condition

  Total price: (including 17% VAT)

  The above set of mould material: _____________________

  (the above mold materials are provided by the seller).

  I. The rights and responsibilities of the two parties:

  Buyer's responsibility and rights are as follows:

  1. the buyer is responsible for the delivery of the R & D requirements and plans of the seller's project, and provides the sales forecast as far as possible.

  2. the buyer is responsible for the delivery of the product design drawings and other related technical information required by the seller to the seller and the technical support.

  3., the buyer has the sole right to interpret the product design drawings and related technical data delivered to the seller. When there is ambiguity, the Seller shall consult the buyer's opinion and confirm it by the buyer.

  4. after the seller completes the design and manufacture of the mould, the buyer will go to the seller's site to verify the mold, or to provide the product sample to the buyer for confirmation and confirmation by the seller. The moulds referred to in this contract include the mould of the product itself and the fixture and mould needed for the subsequent production.

  The rights and responsibilities of the seller are as follows:

  1. the seller is responsible for the design and manufacture of the moulds according to the product design drawings and other related technical information provided by the buyer.

  Be responsible for completing the mold according to the buyer's design requirements in accordance with the stipulations of the contract.

  2. the Seller shall be responsible for providing timely certification and sample test, trial production of desired products. At the same time the seller must provide the details of the related products.

  The detailed test report is for the buyer's confirmation. In case of repair / modification, the test report is also attached at the same time.

  The buyer does not bear any responsibility.

  1.5 the Seller shall give the buyer the corresponding compensation in the form of the buyer's approval as the seller causes the buyer to spend the labor and cost outside the normal technical support as a result of the seller's cause.

  2. the progress of the model:

  2.1 the seller after the receipt of the buyer after the confirmation of product drawing, which began to enter the mold design and production stage, open cycle for ________ days

  2.2 due to buyer's cause the delay of mold making progress is not calculated.

  2.3 if the seller's mold making process and other mistakes lead to the failure of the mold to be accepted and the buyer is in urgent need of production.

  At the same time, the production should be arranged with the existing mold, and the die should be reopened according to the requirements of the drawings and samples.

  3. mode of payment:

  Party B agrees that Party A will pay the payment as follows.

  3.1 separate settlement: Monthly knot, 60 days after the opening of the ticket, open 17% VAT invoices.

  3.1.1 of the total amount of the contract manufacturing batch mould (including VAT) for RMB _________ yuan (RMB ________ yuan), the buyer to pay the total amount of _____% mold, mold ___% residual cost allocation in the first 50K products, if the number of orders less than 50K, the buyer shall supply the seller after the unamortized tooling cost.

  3.1.2 from the two sides after the signing of the contract, the seller to provide value-added tax invoices (mold total ____%), the buyer within twenty working days of payment.

  4. product order: only after the quality acceptance of the product sample is qualified and the buyer's written confirmation, the seller may accept the order of the third party authorized by the buyer or the buyer. The order contract signed by third parties authorized by the buyer with the buyer's seller is subject to this contract.

  Four, product quality assurance

  After the seller has completed the mold, the Seller agrees to guarantee the quality of the product in accordance with the buyer's quality standard (the first confirmation report).

  The buyer reserves the right to modify the content of the quality standard in accordance with the actual needs.

  Five. The ownership of the mold

  1. the ownership of all moulds and clamping fixtures and their assembly drawings and parts drawings (including 2D and 3D) involved in the contract shall be owned by the buyer, and the Seller shall not interfere with the buyer's disposition of the molds. If the seller is responsible for the custody of the seller, the Seller shall not supply the mould to the third party without the buyer's consent, otherwise the buyer shall have the right to ask the seller to return the mold fee and compensate for the loss.

  2. when the buyer pays the mold cost, the seller must cooperate with the buyer or the third party designated by the buyer to transfer the inspection and accept the replacement of the die from the seller's place, and will replace the worn parts at the expense of itself, so as to ensure the restart of production. The seller is obliged to assemble, rust and pack the moulds and send it to the place designated by the buyer. All mold assembly drawings and part drawings (including 2D and 3D) and all clamping devices must be transferred to the buyer at the same time.

  3., during the process of mold transfer, such as the improper assembly, rust prevention or packaging of the seller, it will cause damage to the mold, and all direct and indirect losses arising therefrom shall be borne by the seller.

  Six, mold maintenance

  1., the Seller guarantees the service life of the mould 500 thousand times, and the seller is responsible for free maintenance during this period. If the mold is not used during the service life, the Seller shall be responsible for changing or re opening the mold and taking the corresponding cost.

  2. the seller should die changes, maintenance and repairs in a timely manner and register, whether such a modification, maintenance and repair are

  The buyer made it. If the buyer is to ask the relevant technical details or evidence, the buyer may register with the time without notice. The Seller shall give the buyer a copy of the record once every three months. The seller should take the initiative to complete this task on a regular basis without the buyer's request.

  Six. Intellectual property rights

  The product and the buyer 1. involved in this contract to provide design drawings and other information in the intellectual property is owned by the buyer, the buyer without permission, the Seller shall not disclose to any company or individual, otherwise all the losses resulting from the seller; the buyer only agreed to all data and information provided by the seller by the buyer the purpose of this contract based on the,

  2. the Seller agrees to the design drawings will not be provided by the buyer and other data or information for the purpose of non contract other than the seller or the buyer has the right to pursue responsibility; without written permission from the buyer, the Seller shall not in publications, advertising or other written and oral form to the seller to provide or have provided any data and information.

  3., without the buyer's license, it is strictly prohibited for the seller to use this mould to supply other customers other than the buyer or the buyer's designated customer, otherwise all direct and indirect losses arising from it shall be the seller's responsibility.

  4. other undisclosed matters of confidentiality are carried out in accordance with the "confidentiality agreement" signed by the buyer and the seller.

  Seven. Liability for breach of contract

  1. the Seller shall be liable for breach of contract if the seller fails to complete the mold making and sample delivery according to the progress of each stage specified in the 2.1. The Seller shall pay the buyer a fine of 2% of the total amount of this contract at a time of one day of delay. The amount of the penalty is not more than the total amount of the contract.

  2., if the seller's cause causes the seller's quality to be supplied to the buyer can't meet the buyer's requirements, and the other materials will be lost and scrapped during the assembly process, the seller will fully compensate for the loss and scrap materials and the resulting artificial / stop line costs. The two parties may sign separately the raw material for production.

  3. the quality and progress of the product provided to the buyer by the seller for the seller's cause can not reach the buyer.

  Place)

  3. when the mold is certified by the buyer, the seller is responsible for the seal of the mold. If the buyer agrees that the seller is responsible for the subsequent processing and production of the products, the Seller shall be responsible for the repair and maintenance of the moulds, and the Seller shall make the batch production according to the order of the third party authorized by the buyer or the buyer.

  4. for all the molds produced by the buyer, the Seller shall provide the buyer with detailed design drawings. All drawings must be made in AutoCAD or pro-eng (pro-el2) and must be transmitted to the buyer in electronic form before the mold opening for approval.

  Two. Technical terms:

  1. repair and maintenance of the mold: the seller is responsible for the repair and maintenance of the mold during the production process.

  2., after no dispute between the two sides, the buyer will provide the product design drawings and related technical information to the seller, and send the engineer to the seller's technical exchange or the seller send the engineer to the buyer for technical communication. The product drawings and technical requirements list is attached to Annex 1.

  3. the seller promised to use the quality requirements of the mold for the system to produce products to the buyer

  4. the seller promised to use the mold for the system to produce the product can reach the seller's delivery capacity:

  Nissan energy: _______k, monthly capacity: ______k

  5. the seller promises that all the moulds involved in this contract can be reached to 400 thousand times.

  6., without the buyer's permission, it is strictly prohibited for the seller to contract the whole part of the contract involved in the contract to other companies for processing. Otherwise, the Seller shall be liable for breach of contract in accordance with the breach clause of the contract as a breach of contract.

  Three. The terms of business:

  1. mold price:

  1.1 after negotiation between the two parties, the seller will provide the final offer of the mould approved by the buyer and sign the price confirmation as an indispensable part of the contract.

  The total amount of 1.2 contract (including VAT mold ____%) rmb_______.

  1.3 the total cost of the price of the mold contains the following expenses, and the Seller shall not ask the buyer for the following reasons:

  1.3.1 the cost of all the fixtures and tools required by the seller for the molding / two processing / assembly of the product;

  1.3.2 the seller, according to the contract, carries out the cost of material, equipment and manpower for mould design, test mould.

  1.3.3 the cost of the sample (800 sets) provided by the seller to the buyer for the certification of the mold and product;

  1.3.4 the seller is the cost of the die vulnerable spare parts to ensure the normal production of the mold;

  1.3.5 the cost of the related tools and tools for other processes that are prepared for the normal production of the product.

  1.4 when the written request of the buyer the seller according to the change of the product design for the mould modification, if the mould modification is relatively simple, including less mold material changes and other simple changes from the mold, the seller to the buyer without charges; if the modification is complex, great influence on the whole structure of the mold, then the seller according to the modified working hours for mold to the buyer by the buyer offer, the corresponding mold modification cost. The buyer shall not bear any responsibility for the repair or modification of the mold due to the seller's reason, due to the failure of the mold to meet the buyer's requirements.

  1.5 by the seller to the buyer's manual and cost technical support from the normal cost, the Seller shall give the buyer recognized the way the corresponding compensation.

  2. the progress of the model:

  2.1 after the seller has received the product drawing file after the buyer's confirmation, that is,

  The cost of artificial / stop line formation. The two parties may sign separately the raw material for production.

  3. if the seller has caused the seller to the buyer of the product quality and schedule is not up to the requirements of the buyer, the buyer and customer missed the best time to market, or the buyer was forced to cancel the project, so that the buyer and its customers suffer serious losses and loss of material research, in addition to the seller to refund all previous the buyer to pay the purchase price, depending on the actual situation of the seller also bear the buyer direct and indirect economic losses.

  4., if the seller is unable to resist force, including the war, fire, strike, and other force majeure caused by Chinese law, the buyer will allow the buyer to dismiss it. The Seller shall notify the buyer in written form within 24 hours after the occurrence of the force majeure, and the seller is obliged to take all necessary measures to deliver the goods as soon as possible. If the force majeure continues for more than 2 weeks, the buyer has the right to cancel this contract.

  5. other unfinished matters: implemented in accordance with the economic contract law.

  Eight. Dispute settlement

  Any dispute arising from the execution of this contract shall be settled through friendly negotiation first. If no negotiation can be reached within 30 days, either party can submit the dispute to the municipal court.

  The parties to this contract shall be strictly enforced. If one party fails to perform the contract in the cause of the contract, the party must ask for the consent of the other party two weeks in advance, and the contract shall be terminated.

  The buyer: the seller: ____________ ____________

  Representative: Representative: ___________ ____________

英文合同 篇4

  Quality-eternal Investment Co., Ltd.

  编 号(No.): ACM001

  签约地(Signed at):伦敦London 日 期(Date): 09.13.20xx 卖方(Seller): 地址(Address):

  电话(Tel): 传真(Fax):

  买方(Buyer):

  地址(Address):

  电话(Tel):

  买卖双方经协商同意按下列条款成交:

  The undersigned Seller and Buyer have agreed to close the following transactions according to the terms and conditions set forth as below:

  1. 货物名称、规格和质量 (Name, Specifications and Quality of Commodity):数量(Quantity):单价及价格条款 (Unit Price and Terms of Delivery) ::

  (除非另有规定,"FOB"、"CFR"和"CIF"均应依照国际商会制定的《20xx年国际贸易术语解释通则》(INCOTERMS 20xx)办理。)

  The terms FOB,CFR,or CIF shall be subject to the International Rules for theInterpretation of Trade Terms (INCOTERMS 20xx) provided by International Chamber of Commerce (ICC) unless otherwise stipulated herein.)

  2. 总价 (Total Amount):

  $5745

  3. 允许溢短装(More or Less):2%。4. 装运期限(Time of Shipment): 收到全部货款后20天内装运。

  Within 20 days after receipt of full payment by T/T. .

  5. 付款条件(Terms of Payment): 出货前付清货款。

  Pay total charge before shipment

  6. 包装(Packing):

  7 品质/数量异议 (Quality/Quantity discrepancy):

  如买方提出索赔,凡属品质异议须于货到目的口岸之日起30天内提出,凡属数量异议须于货到目的口岸之日起15天内提出,对所装货物所提任何异议于保险公司、轮船公司、其他有关运输机构或邮递机构所负责者,卖方不负任何责任。

  In case of quality discrepancy, claim should be filed by the Buyer within 30 days after the arrival of the goods at port of destination, while for quantity discrepancy, claim should be filed by the Buyer within 15 days after the arrival of the goods at port of destination. It is understood that the Seller shall not be liable for any discrepancy of the goods shipped due to causes for which the Insurance Company, Shipping Company, other Transportation Organization /or Post Office are liable.

  8.由于发生人力不可抗拒的原因,致使本合约不能履行,部分或全部商品延误交货,卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不能克服的客观情况。

  The Seller shall not be held responsible for failure or delay in delivery of the entire lot or a portion of the goods under this Sales Contract in consequence of any Force Majeure incidents which might occur. Force Majeure as referred to in this contract means unforeseeable, unavoidable and insurmountable objective conditions.

  9. 仲裁(Arbitration):

  因凡本合同引起的或与本合同有关的`任何争议,如果协商不能解决,应提交中国国际经济贸易仲裁委员会深圳分会。按照申请仲裁时该会当时施行的仲裁规则进行仲裁。仲裁裁决是终局的,对双方均有约束力。

  Any dispute arising from or in connection with the Sales Contract shall be settled through friendly negotiation. In case no settlement can be reached, the dispute shall then be submitted to China International Economic and Trade Arbitration Commission (CIETAC) , Shenzhen Commission for arbitration in accordance with its rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties.

  10. 通知(Notices):

  所有通知用___文写成,并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更,一方应在变更后___日内书面通知另一方。

  All notice shall be written in _____ and served to both parties by fax/e-mail /courier according to the following addresses. If any changes of the addresses occur, one party shall inform the other party of the change of address within ____ days after the change.

  11. 本合同为中英文两种文本,两种文本具有同等效力。本合同一式___2__份。自双方签字之日起生效。

  This Contract is executed in two counterparts each in Chinese and English, each of which shall be deemed equally authentic. This Contract is in _____ copies effective since being signed/sealed by both parties.

  The Seller: The Buyer: 卖方签字:买方签字:

英文合同 篇5

  (Translation)

  Mortgage Contract

  No. J.K.D.20xx—032

  hereinafter referred to as the main contract) signed by (borrower) and Party A Party B is willing to use the property owned or disposable according to laws as mortgage; Through verification, Party A agrees to accept the property mortgage of Party B;

  According to relevant laws and regulations, based on mutual negotiations, Party

  A and Party B make agreement in the following articles:

  Article 1 Collateral of Party B

  Party B uses the property in the List of Collateral (appendix) for mortgage. Party

  B guarantees its ownership or right of disposal according to laws.

  Article 2 Method of Mortgage Guarantee

  1. When the debt stipulated in the main contract is due, the guarantee responsibility of the loan provided by Party A to Party B yet not repaid by Party B is ascertained according to the scope of mortgage guarantee in Article 3 of this contract; before the debt stipulated in the main contract is due, if Party A conducts recourse on the borrower in advance according to the main contract, Party B shall also take the guarantee responsibility with the collateral.

  2. If Party A and Party B (or borrower) make written agreement of extending duration on the debt duration, interest rate, amount and etc. stipulated in the main contract, or Party A makes an adjustment in the interest rate according to the main contract during the debt duration stipulated in the main contract, it is not necessary to

  get consent from Party B or to inform Party B and Party B agrees to all, then the mortgage guarantee responsibility undertaken by Party B shall not be affected.

  Article 3 Scope of Mortgage Guarantee

  The scope of mortgage guarantee includes the entire principal stipulated in the main contract, interest, overdue interest, penalty interest, compound interest, default fine, compensation for loss, all charges to enforce the mortgage right and realize the creditor’s rights (including but not limited to legal costs, arbitration fees, costs of preservation, announcement fees, assessment fees, appraisal charges, auction costs, travel expenses, communication expenses, counsel fees and etc.) and all other payable expenses of the debtor in the main contract.

  Article 4 Custody of Ownership Certificate and Registration

  of the Collateral

  Party B shall deliver ownership certificate of the collateral to Party A on the date of contract signing, and both parties agree that within days after the contract is signed, Party B shall unconditionally assist Party B with relevant mortgage registration procedures. Ownership certificate of the collateral shall be in the custody of Party A during mortgage period.

  Article 5 When there are other mortgage guarantee, pledge guarantee or guarantees in the creditor’s rights of Party A, if Party A gives up or removes other mortgage guarantee and pledge guarantee or dismisses guarantee responsibility of guarantees, Party B shall still take mortgage guarantee responsibility regarding Party

  A according to articles stipulated in this mortgage contract.

  If Party A suspends granting the loan that has not been granted or collects granted loan in advance based on the articles in the main contract, the guarantee responsibility undertaken by Party B according to this contract shall not be affected.

  Article 6 Cost Bearing

  Relevant costs stipulated in this contract such as assessment fees, insurance premium, appraisal charges, registration fees, custody charges and etc.

  Article 7 Custody of the Collateral

  1. During the mortgage period, the collateral shall be in custody of Party B or the entrusted agent of Party B; Party B and the entrusted agent of Party B shall maintain proper custody of the collateral and have the obligation of repair, maintenance and keeping it intact and shall accept the inspection of Party A at any time.

  The mortgage period refers to the period from the day this contract comes into effect to the expiration day of statute of limitations of creditor’s rights stipulated in the Loan Contract.

  2. During the mortgage period, Party B shall not take any actions that will reduce the value of the collateral; if such actions occur, Party A has the right to demand Party B to stop and recover the value of the collateral, or to provide new collateral accepted by Party A within 2 days after Party A informs Party B. Costs resulted from the recovery of the collateral of providing new collateral shall be undertaken by Party B.

  3. Party B shall purchase property insurance for the collateral during the mortgage period, and the first beneficiary of the property insurance shall be Party A. Insurance documents shall be in custody of Party A. During the mortgage period, if losses within the insurance scope of the collateral occur or the value of the collateral is reduced because of the actions of the third party, insurance compensation or compensation for losses shall be used to liquidate the debt stipulated in the main contract in advance or shall be deposited by Party B in the account appointed by Party A, and Party B shall not use during the mortgage period.

  Article 8 During the mortgage period, if the collateral causes environmental pollution or other damages, Party A alone shall take the responsibility.

  Article 9 During the mortgage period, without written consent from Party A, Party B shall not give away, remove, rent, transfer, remortgage or dispose in other ways the collateral stipulated in this contract.

  Article 10 During the mortgage period, with written consent from Party A, payment received from the transfer of the collateral by Party B shall be used to liquidate the mortgaged creditor’s rights of Party A in advance.

  Article 11 In the expiration of the time limit of the main contract, if the borrower cannot liquidate the debt, Party B has the right to discount the collateral or take priority in compensation with the payment from the auction or selling off of the collateral.

  Article 12 Party A has the right to realize the mortgage right through disposal of the collateral in advance, suspend the grant of loan stipulated in the main contract or collect the principal and interest of the granted loan stipulated in the main contract in advance when one of the following circumstances occur:

  1. There are defaults of the articles or agreement stipulated in the main contract made by the borrower;

  2. There are violations of in the agreed responsibility stipulated in Article 4, Article 7, Article 8, Article 9 and Article 10 of this contract or other actions of defau< or Party B fails to fulfill resposibilities stipulated in this contract.

  3. When Party B is a legal person or other organizations, situations that will affect its ability to liquidate debts or lack of good faith in debt liquidation occur such as suspension of business, suspension or annulment of business license, application or

  being applied for bankruptcy, dissolution and etc.

  4. When Party B is a natural person, death without heirs or devisees occurs;

  5. When Party B is a natural person, heirs or devisees of Party B give up the inheritance or bequest and refuse to fulfill the obligation of repaying loan principal and interest;

  6. Other events that will endanger the realization of creditor’s rights of Party A stipulated in the main contract.

  Article 13 Responsibility for Breach of Contract

  1. If Party B violates Article 7 of the contract through reduction in the value of the collateral resulting from the carelessness in the repair and management of the collateral, or actions of Party B directly endanger the collateral and result in the reduction in the value of the collateral, Party A has the right to demand Part B to immediately stop the violating actions towards the mortgage right of Party A, to demand Party B to provide other collateral accepted by Party A, and to dispose the collateral in advance.

  2. If Party B violates Article 9 of the contract and arbitrarily disposes the collateral, the action is not valid; Party A has the right to demand Part B to immediately stop the violating actions towards the mortgage right of Party A, to demand Party B to provide other collateral accepted by Party A;

  3. If Party B conceals the fact that the collateral is involved in co-ownership, disputes, seal-up, impoundment, rent, existing mortgage, legal priority right with lower mortgage right (including but not limited to priority right of construction project payment) or no ownership or disposal right of Party B and etc., Party A has the right to demand Party B to provide other collateral/ pledge property accepted by Party A;

  4. When any of the above circumstances violating the contract occurs, if Party B fails to provide other collateral according to the requirements of Party A, Party B shall pay Party B a default fine amounting to of the loan principal stipulated in the main contract. If economic losses are caused to Party A, Party B shall compensate Party A for all the economic losses.

  Article 14 Payment from Exercise of the Mortgage Right by Party A Shall be Assigned in Priority of the Following Order:

  1. Payment of charges related to the exercise of the mortgage right;

  2. Liquidation of interest payable by the borrower to Party A;

  3. Liquidation of loan principal, default fine (including penalty interest), compensation and etc. payable by the borrower to Party A;;

  4. Payment of other cost.

  Article 15 Delivery

  Except for other agreement, both parties designate the communication method and contact address stipulated in the contract as the basis, and any written notification delivered to the address shall be considered effective arrival. Party B shall promise that if there is any change in the communication method and contact address, Party A fails to notify the other party about the change in the communication method or contact address according to the agreement resulting in this party not receiving the notification from the other party, this party shall undertake corresponding consequences by itself.

  The signing of personnel authorized by Party B or arranged by Party A for come-and-go files, legal papers or relevant notifications shall be regarded as the arrival to Party B, except that Party B explicitly notifies Party A in the written form that the personnel is not entitled to sign the come-and-go files, legal papers or relevant notifications.

  Article 16 Terms of Compulsory Execution

  1. Party A and Party B both confirm that according to relevant laws and regulations, they have specific understanding of the definition, content, procedure and effect of notarization that gives compulsory execution effect, and through conscious consideration, all parties agree to apply to the notarization authority for notarization and give this contract effect of compulsory execution.

  2. Party B promises to accept compulsory execution according to laws when failing to fulfill or completely fulfill obligation of repayment stipulated in the contract; Party B gives up the right of pleadings.

  3. When Party B fails to fulfill relevant obligations stipulated in the contract, Party A has the right to conduct collection and interpellation to Party B through mail delivery, telephone notification, announcement delivery and etc. Party B shall fulfill relevant obligations stipulated in the contract within three days after the collection and interpellation of Party A. If Party B still fails to fulfill relevant obligations stipulated in the contract, Party A has the right to apply to notarization authority for execution certificate.

  4. Agreed items in advance about the verification contents and methods of the notarization authority before the Execution Certificate is issued: if Party B fails to fulfill or completely fulfill guarantee responsibility, Party A provides the notarization authority with evidence of Party B’s failure of fulfillment. Based on the application of Party A, before the Execution Certificate is issued, the notarization authority verifies the fact of Party B’s failure of fulfillment or proper fulfillment of guarantee responsibility through letters or telephones (faxes) according to the contact address or contact telephone stipulated in the contract before. Party B shall substantially respond to the verified contents made by the notarization authority within five days according to the requirements of the notarization authority, otherwise no disagreement from

英文合同 篇6

  出租方(甲方)lessor (hereinafter referred to as party a) :

  承租方(乙方)lessee (hereinafter referred to as party b) :

  根据国家有关法律、法规和有关规定,甲、乙双方在平等自愿的基础上,经友好协商一致,就甲方将其合法拥有的房屋出租给乙方使用,乙方承租使用甲方房屋事宜,订立本合同。

  in accordance with relevant chinese laws 、decrees and pertinent rules and regulations ,party a and party b have reached an agreement through friendly consultation to conclude the following contract.

  一、 物业地址 location of the premises

  甲方将其所有的位于上海市_________区____________________________________的房屋及其附属设施在良好状态下出租给乙方___________使用。

  party a will lease to party b the premises and attached facilities all owned by party a itself, which is located at _______________________________________ __________________________ and in good condition for_____________ .

  二、 房屋面积 size of the premises

  出租房屋的`登记面积为_________平方米(建筑面积)。

  the registered size of the leased premises is_________square meters (gross size).

  三、 租赁期限 lease term

  租赁期限自_______年___月___日起至_______年___月___日止,为期___年,甲方应于_______年___月___日将房屋腾空并交付乙方使用。

  the lease term will be from _____(month) _____(day) _______(year) to ________(month) _____(day) _______(year). party a will clear the premises and provide it to party b for use before _____(month) _____(day) _______(year).

  四、 租金 rental

  1. 数额:双方商定租金为每月人民币_____________元整, 乙方以___________形式支付给甲方 。

  amount: the rental will be ____________per month. party b will pay the rental

  to party a in the form of ____________in ________________.

  2. 租金按_____月为壹期支付;第一期租金于_______年_____月_____日以前付清;以后每期租金于每月的______日以前缴纳,先付后住(若乙方以汇款形式支付租金,则以汇出日为支付日,汇费由汇出方承担)。甲方收到租金后予书面签收。

  payment of rental will be one installment everymonth(s). the first installment will be paid before_______(month)______(day)__________(year). each successive installment will be paid_____________each month.

  party b will pay the rental before using the premises and attached facilities (in case party b pays the rental in the form of remittance, the date of remitting will be the day of payment and the remittance fee will be borne by the remitter.) party a will issue a written receipt after receiving the payment.

  3. 如乙方逾期支付租金超过十天,则每天以月租金的0.5%支付滞纳金;如乙方逾期支付租金超过十五天,则视为乙方自动退租,构成违约,甲方有权收回房屋,并追究乙方违约责任。

  in case the rental is more than ten working days overdue, party b will pay 0.5 percent of monthly rental as overdue fine every day, if the rental be paid 15 days overdue, party b will be deemed to have with drawn from the premises and breach the contract. in this situation, party a has the right to take back the premises and take actions against party b's breach.

  五、 保证金 deposit

  1. 为确保房屋及其附属设施之安全与完好,及租赁期内相关费用之如期结算,乙方同意于______年_____月_____日前支付给甲方保证金人民币 _________元整,甲方在收到保证金后予以书面签收。

  guarantying the safety and good conditions of the premises and attached facilities and account of relevant fees are settled on schedule during the lease term, party b will pay _________to party a as a deposit before _____(month) _____(day) _______(year). party a will issue a written receipt after receiving the deposit.

  2. 除合同另有约定外,甲方应于租赁关系消除且乙方迁空、点清并付清所有应付费用后的当天将保证金全额无息退还乙方。

  unless otherwise provided for by this contract, party a will return full amount of the deposit without interest on the day when this contract expires and party b clears the premises and has paid all due rental and other expenses.

  3. 因乙方违反本合同的规定而产生的违约金、损坏赔偿金和其它相关费用,甲方可在保证金中抵扣,不足部分乙方必须在接到甲方付款通知后十日内补足。

  in case party b breaches this contract, party a has right to deduct the default fine, compensation for damage or any other expenses from the deposit . in case the deposit is not sufficient to cover such items, party b should pay the insufficiency within ten days after receiving the written notice of payment from party a.

  六、 甲方义务 obligations of party a

  1. 甲方须按时将房屋及附属设施(详见附件)交付乙方使用。

  party a will provide the premises and attached facilities (see the appendix of furniture list for detail) on schedule to party b for using.

  2. 房屋设施如因质量原因、自然损耗或灾害而受到损坏,甲方有修缮并承担相关费用的责任。

  in case the premise and attached facilities are damaged by quality problems, natural damages or disasters, party a will be responsible to repair and pay the relevant expenses.

  3. 甲方应确保出租的房屋享有出租的权利,反之如乙方权益因此遭受损害,甲方应负赔偿责任。

  party a will guarantee the lease right of the premises. otherwise, party a will be responsible to compensate party b's losses.

  七、 乙方义务 obligations of party b

  1. 乙方应按合同的规定按时支付定金、租金及保证金。

  party b will pay the rental, the deposit and other expenses on time.

  2. 乙方经甲方同意,可在房屋内添置设备。租赁期满后,乙方将添置的设备搬走,并保证不影响房屋的完好及正常使用。

  party b may decorate the premises and add new facilities with party a's approval. when this contract expires, party b may take away the added facilities which are removable without changing the good conditions of the premises for normal use.

  3. 未经甲方同意,乙方不得将承租的房屋转租或分租,并爱护使用该房屋如因乙方过失或过错致使房屋及设施受损,乙方应承担赔偿责任。

  party b will not transfer the lease of the premises or sublet it without party a's approval and should take good care of the premises. otherwise, party b will be responsible to compensate any damages of the premises and attached facilities caused by its fault and negligence.

  4. 乙方应按本合同规定合法使用该房屋,不得擅自改变使用性质。乙方不得在该房屋内存放危险物品。否则,如该房屋及附属设施因此受损,乙方应承担全部责任。

  party b will use the premises lawfully according to this contract without changing the nature of the premises and storing hazardous materials in it. otherwise, party b will be responsible for the damages caused by it

  5. 乙方应承担租赁期内的水、电、煤气、电讯、收视费、等一切因实际使用而产生的费用,并按单如期缴纳。

  party b will bear the cost of utilities such as communications, water, electricity, gas, management fee etc. on time during the lease term.

  八、 合同终止及解除的规定 termination and dissolution of the contract

  1. 乙方在租赁期满后如需退租或续租,应提前两个月通知甲方,由双方另行协商退租或续租事宜。在同等条件下乙方享有优先续租权。

  within two months before the contract expires, party b will notify party a if it intends to extend the leasehold. in this situation, two parties will discuss matters over the extension.

  2. 租赁期满后,乙方应在当天将房屋交还甲方;任何滞留物,如未取得甲方谅解,均视为放弃,任凭甲方处置,乙方决无异议。

  when the lease term expires, party b will return the premises and attached facilities to party a within days. any belongings left in it without party a's previous understanding will be deemed to be abandoned by party b. in this situation, party a has the right to dispose of it and party a will raise no objection.

  3. 本合同一经双方签字后立即生效;未经双方同意,不得任意终止,如有未尽事宜,甲、乙双方可另行协商。

  this contract will be effective after being signed by both parties. any party has no right to terminate this contract without another party's agreement. anything not covered in this contract will be discussed separately by both parties

  九、 违约及处理 breach of the contract

  1. 甲、乙双方任何一方在未征得对方谅解的情况下,不履行本合同规定条款,导致本合同中途中止,则视为该方违约,双方同意违约金为人民币___________元整,若违约金不足弥补无过错方之损失,则违约方还需就不足部分支付赔偿金。

  during the lease term, any party who fails to fulfill any article of this contract without the other party's understanding will be deemed to breach the contract. both parties agree that the default fine will be________________. in case the default fine is not sufficient to cover the loss suffered by the faultless party, the party in breach should pay additional compensation to the other party.

  2. 若双方在执行本合同或与本合同有关的事情时发生争议,应首先友好协商;协商不成,可向有管辖权的人民法院提起诉讼。本合同一经双方签字后立即生效;未经双方同意,不得任意终止,如有未尽事宜,甲、乙双方可另行协商。

  both parties will solve the disputes arising from execution of the contract or in connection with the contract through friendly consultation. in case the agreement cannot be reached, any party may summit the dispute to the court that has the jurisdiction over the matter.

  十、 其他 miscellaneous

  1. 本合同附件是本合同的有效组成部分,与本合同具有同等法律效力。

  any annex is the integral part of this contract. the annex and this contract are equally valid.

  2. 本合同壹式贰份,甲、乙双方各执一份。

  there are 2 originals of this contract. each party will hold 1 original(s).

  3. 甲、乙双方如有特殊约定,可在本款另行约定:

  other special terms will be listed bellows:

  __________________________________________________________________________________

  __________________________________________________________________________________

  甲 方:

  party a

  证件号码:

  id no

  联络地址:

  address

  电 话:

  tel:

  代 理 人:

  representative:

  日 期:

  date:

英文合同 篇7

  Contract for Equipment Sales and Technology Licensing

  Contract No. ____________________

  This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

  Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

  Article 1 Definitions

  1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

  1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

  1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

  1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

  1.5 “Destination Airport” refers to _____________Airport.

  1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

  1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

  1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

  1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

  1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

  1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

  1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

  1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

  1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

  1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

  1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

  1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

  1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

  1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

  Article 2 Scope of the Contract

  2.1 The Seller’s Obligation

  2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

  2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

  2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

  2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

  2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

  2.2 The Buyer’s Obligation

  2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

  2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

  2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run, Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

  2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

  2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

  2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

  Article 3 Grant of License

  3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

  3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

  (Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

  3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

  3.4 Territory

  3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

  3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

  Article 4 Price

  4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

  4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

  The breakdown price is as follows:

  The price for Equipment is __________(say _______________________ only).

  Fee for design is __________(say _______________________ only).

  Fee for Technical Documentations is __________(say _______________________ only).

  License fee is __________________(Say: _________________ only)

  4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 20xx, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

  4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

  4.2.3 The above price is fixed and firm.

  4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

  4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

  Article 5 Payment

  5.1 Down Payment

  Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

  ......................The Beginning of Option.......................

  5.2 [Option One: Payment by Sight L/C]

  The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

  5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

  (a) Bill of Lading in one (1) original and ___ ( ) copies;

  (b) Commercial Invoice in one (1) original and ___ ( ) copies;

  (c) Packing list in one (1) original and ___ ( ) copies;

  (d) Certificate of Origin in one (1) original and ___ ( ) copies;

  (e) Insurance Policy in one (1) original and ___ ( ) copies;

  5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

  (a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

  (b)One ( 1 ) copy of commercial invoice.

  5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

  a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

  b) One (1) copy of Commercial Invoice.

  5.2 [Option Two: Payment under a L/G]

  The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

  ......................The End of Option.......................

  5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

  Article 6 Delivery of Equipment and Technical Documentation

  6.1 The Delivery of the Equipment

  6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

  6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

  Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

  6.1.3 The port of shipment is ____, while the port of destination is ____.

  6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

  6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

  6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

  (a) Contract number

  (b) Name of the vessel and loading port

  (c) Name of the Equipment shipped

  (d) Number and date of Bill of Lading

  (e) Total volume

  (f) Total gross and net weight

  (g) Total number of packages/cases

  6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

  (a) Bill of Lading

  (b) Commercial Invoice

  (c) Packing List

  (d) Certificate of Origin

  (e) Insurance Policy.

  6.2 The Late Delivery of the Equipment

  6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

  (a) From the first week to the fourth week, the liquidated damages shall be

  ____ ( ) percent of the value of the delayed portion of the Equipment per

  week

  (b) From the fifth week to the eighth week, the liquidated damages shall be

  ____ ( ) percent of the value of the delayed portion of the Equipment per week

  (c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

  the value of the delayed portion of the Equipment per week

  6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

  6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

  6.3 The Delivery of the Technical Documentation

  6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

  6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

  6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

英文合同 篇8

  合约编号:________

  Contract NO._______

  售货合约

  SALESCONTRACT

  -------

  买方:_____

  日期:____年__月__日

  Buyers:_____cate:_____

  卖方:____ 中国___进出口公司___省分公司

  Sellers: China National Metals &Minerals Import& Export corporation

  ,____Branch

  双方同意按下列条款由买方购进卖方售出下列商品:

  The Buyers agree to buy and the Sellers agree to sell the following

  good ontermsand conditions set for the below:

  ──────────────┬───────┬──────┬──────(1)货物名称及规格,包装及│(2)数量 │(3)单价 │(4)总价装运唛头 │ ││

  Name or commodity and Speci- │Quantity│unit price │Total

  Fications Packing and shipp- │ ││AmountIng Marks │ ││

  ──────────────┼───────┼──────┼──────(装运数量允许有 %的增减)│ ││

  (Shipment Quantity % more │ ││

  Or less allowd │ ││

  ──────────────┴───────┴──────┴──────(5)装运期限

  Time of Shipment:

  (6)装运口岸

  Ports of Loading

  (7)目的.口岸

  Port of Destination:

  (8)保险:投保___险,由___按发票金额___%,投保

  Insurance: Covering Risks for____% of Invoice Value to be effected

  By the

  (9)付款条件:___……

  Terms of Payment :___凭保兑的,不可撤消的,可转让的,可分割的即期付款信用证,信用证以中

  国五金矿产进出口公司__分公司为受益人并允许分批装运和转船。

  By confirmed irrevocable, transferable and divisible letter of credit

  In favour of China National Metals &Minerals Import& Export Corporation

  ___Branch payable at sight allowing partial shipments and transhipment.

  该信用证必须在___前开到卖方,信用证的有效期应为装船期后15天,在上述装运口岸到期,

  否则卖方有权取消本售货合约并保留因此而发生的一切损失的索赔权。

  注意:开立信用证时,请在证内注明本售货确认书号码 China National Texties Import and

  Export Corporation

  IMPORTANT: When establishing L/C, please

  Indicate the number of this Sales c ofrSHANTUNGBRANCH

  Mation in the L/C.

  买方(The Buyers):_____

  卖方(The Sellers):_____

  请在本合同签字后寄回一份存档

  Please sign and return one copy for outfile.

英文合同 篇9

  编号no. _____________

  中国 china

  c.i.f./c.&f.

  合同格式

  c.i.f. /c. &f.from

  买受人: ______________ 出卖人:________________

  buyer: ______________ seller:________________

  地址: ______________ 地址: ________________

  adress: ______________ adress:________________

  电挂: ______________ 电挂: ________________

  cable: ______________ cable: ________________

  电传: ______________ 电传: ________________

  telex: ______________ telex: ________________

  上述买卖双方按照下列条件于____年____月____日签订合同。

  the seller and the buyer above named have this ____day of ________ _________entered into this contract on the following terms and conditions .

  1.货物

  commodity :

  序 号

  item no.

  单位

  description

  单价

  unit

  .数量

  quantity

  单价

  unit price

  总价

  amount

  2.合同总价:_____________________

  total contract value:____________

  3.包装:_________________________

  packing:_________________________

  4.保险:根据_____保险公司保险条款按发票金额___%insurance:投保____险。

  covering all risks for ___% of the invoice value as per insurance: policy of people’s insurance company china (p.i.c.c).

  由买方自理。

  to be affected by the buyer.

  5.运输标志:_____________________

  shipping marks:__________________

  6.装运港:_______________________

  intended port(s)of shipment:

  __________________________________

  7.目的港:_______________________

  port of destination:_____________

  8.装运期:_______________________

  shipment period:_________________

  9.付款条件:_____________________

  terms of payment:________________

  合同货款应由买方通过卖方可接受的银行,按合同总价开出以卖方为受益人的、无追索权、保兑、不可撤销、可转让、可分批装运、可转船的信用证支付。凭________即其期汇票在

  提示第10条所列装运单据时付款。该信用证最迟应于装运期开始前________天开到卖方,而且在装运期结束后15天内仍能在中国有效议付。

  若买方未能履行上述义务,根据卖方的选择,可终止本合同,或接受本合同的部分或全部,或就由此而发生的任何损失提出索赔。

  payment hereunder shall be made by confirmed ; irrevocable and transferable without recourse letter of credit in favour of the seller for the total contract value opened by a band acceptable to the seller permitting part shipments and transshipments in one or more vessels ,and available by______sight draft(s) against presentation of the shipping documents mentioned in clause 10.the letter of credit shall reach the seller not less than______days prior to the start of the shipment period and remain valid for negotiation in china until the 15th day after the expiry of the shipment period.

  should the buyer fail to fulfil its obligations mentioned above , the seller shall ,at its discretion, terminate the contract or accept whole or part of this contract ,or lodge a claim for losses thus sustained ,if any .

  10.装运单据:

  shipping documents:

  (a)商业发票;

  commercial invoices (s);

  (b)空白抬头、空白背书、可转让的清结提单,或指定买方为收货人的记名提单;

  negotiable clean bill (s) of lading to order bland endorsed or naming buyer’s consigee;

  (c)原产地证书;

  certificate (s) of origin;

  (d)装箱单;

  packing list ;

  (e)保险单(只适用于gif合同)。

  certificate (s) of insurance (in the case of gif sales) .

  11.合同的完整性与转让:

  complete contract and asignment:

  (a)本合同中的条件和条款构成买卖双方(以下简称“双方”)对合同项下货物的全部和最终理解。对本合同的任何修改、补充或对合同任何条款的免除,均必须经受约束方书面确认,否则无效。

  the terms and conditions found within this contract constitute the complete and final understanding of the seller and the buyer (hereinafter” the parties”) with respect to the commodity referred to herein . no modification, extension or release from any provision hereof shall be effective unless the same shall be confirmed in writing by the party to be bound .

  (b)未经卖方事先书面同意,本合同及合同项下的任何权益不得转让。

  neither this contract nor and interest therein shall be assignable witout the prior written consent of the seller.

  12.担保:

  warranty:

  卖方担保所有货物符合第一条规定的规格。除此之外,任何性质的陈述,担保和条件,均予排除并消灭。

  the seller warrants that all commodity will conform to the description set out in clause 1. save as aforesaid all representations , conditions and warranties of whatsoever nature are hereby excluded and extinguished.

  13.许可证、关税和税收:

  licenses,duties and taxes:

  除本合同另有规定外,所有进口许可、许可证以及不属于国家的任何政府机构征收的一切进口税、关税和各种税收均由买方负担。

  except as otherwise provided herein , all import permits and licenses and the import duties, customs fees and all taxes levied by any government authority other than the seller ’s country shall be the sole responsibility of the buyer.

  14.不可抗力:

  force majeure:

  如果卖方遇到人力不可抗拒事件,包括但不限于火灾、水灾、地震、台风、自然灾害以及任何其他卖方不能合理控制的任何意外事故和情况,阻止、妨碍或干扰了本合同的履行时,本合同规定的卖方履约时间应自动延长,其延长年时间应相当于因人力不可抗拒事件直接地或间接地使卖方不能履行本合同的时间。受不可抗力事件影响的卖方应在合理的时间内,用电报或电传将不可抗力事件的发生通知买方,并于__个月内将有关当局出具的有关不可抗力事件的证明航寄买方。

  如果不履约的情况延续达___天以上,双方应立即协商修改合同。若从不可抗力事件发生之日起___天内双方当事人未能取得双方满意的.解决办法时,任何一方都可以终止履行本合同未执行部分。

  the time for the performance of the seller’s obligations set forth in this contract shall be automatically extended for a period equal to the duration of any nonperformance arising derecly or indirectly from force majeure events including but not limited to fire , flood , earthquake , typhoon , natural catastrophe ,and all other contingencies and circumstances whatsoever beyond the seller’s reasonable control preventing , hindering or interfering with the performance thereof , the seller so prevented by force majeure shall in reasonable time inform the buyer by cable or telex of the occurrence of force majeure and within one month by air mail a relevant certificate issued by competent authorities as evidence thereof . if the nonperformance lasts for more than ___ (___) days ,the parties shall immediately consult together in an effort to agree upon a revised contract basis .if the parties are unable to arrive at a mutually satisfactory solution within _____(___) days from the beginning of such force majeure , then either of the parties may terminate the contract in respect of the unexecuted portion of the contract .

  15.索赔

  claims:

  如发现货物在质量、数量或规格方面与本合同第一条规定不符,卖方同意审核任何因此而提出的索赔。该索赔要求应经卖方认可的有信誉的检验机构出具的报告证实。质量方面的索赔要求应于货物到达目的港后__个月内以书面形式提出,数量或规格方面的索赔要求,应于货物到达目的港后__天内以书面的形式提出。

  在任何情况下,卖方对利润损失、时间延误、商誉损害或其他由此而引起的任何特殊或间接损失概不负责。

  对于任何原因造成的任何性质的一切灭失或损害,卖方的赔偿责任,在任何情况下不得超过索赔部分货物的合同价款,或者根据卖方的选择,对此货物修复或更换。

  should the quality , quantity and / or specification of the commodity be found not in conformity with the description set out in clause one , the seller agrees to examine any claim , which shall be supported by a report issued by a reputable surveyor approved by the seller ,claims concerning quality shall be made in writing within ___months after the arrival of the goods at the port of destination .l claims concerning quantity and / ofr specification shall be made in writing within ______ days after the arrival of the goods at the port of destination . in no event shall the seller be liable for lost profits , delay , injury to goodwill or any special or consequential damages howsoever any lr the same are caused .

  the seller ’ s liability for any and all losses of damages of whatsoever nature resulting from any cause whatsoever shall in no event exceed the portion of the total contract price attributable to commodity in respect of which the claim is made , or at the election of the repair of replacement of such commodity .

  16.仲裁:

  arbitration:

  本合同受中华人民共和国的法律管辖,并按其进行解释。一切因合同引起的或与合同有关的争议,如果可能,应通过友好协商解决。如果协商不能解决,任何一方都可以提出仲裁。仲裁地点为______________。仲裁在________仲裁委员会进行,并适用它的仲裁规则。仲裁裁决是终局的,对双方均有约束力。除仲裁另有裁定外,仲裁费用由败诉方负担。

  this contract shall be governed by and construed in accordance with the law of the people ’s republic of china . all disputes arising from or in connection with this contract shall if possible be settled amicably through friendly negotiation . in case no settlement can be reached thereby the dispute may if either party so requires be resolved by the arbitration shall be ______________________ .the arbitration shall take place in the ______________ arbitration commission and its arbitral rules shall be applicable .the award shall be final and binding upon both parties . the arbitration fees ,unless otherwise awarded ,shall be borne by the losing party.

  卖方和授权的高级职员或代表于上述日期签订本合同,特此为证。

  in witness whereof the seller and the buyer have caused this contract to be executed by their duly authorized officers or representatives as of the day and year first above written.

  出卖人:__________ 买受人:___________

  seller:__________ buyer:___________

【英文合同】相关文章:

跳出英文阅读那些坑,顺利开启亲子英文阅读03-03

英文求职邮件范文03-03

英文催款函范文03-25

英文自我介绍范文03-30

好听的英文水果名字04-18

发英文邮件的正确格式范文03-21

让孩子实现高效自主阅读英文绘本!03-03

餐饮合作合同03-13

餐饮行业合同04-14